The Zebralight SC63 edc flashlight has cool white flood lighting and an amazing 1300 lumens of compact power this flash light is definitely one of the smallest and most powerful flashlights. The zebralight SC63 is only 3.64 inches long and 0.96 inches in diameter at the largest point and weighing in at 1.3 ounces, this light is not much bigger then the size of the actual unprotected cell 18650 battery which is also included with purchase, but the light is still not too small to comfortably hold.
LED: Cree XHP35 Cool White (Nominal CCT 5700K)
SIZE:
Length: 3.64 inch (92.5 mm)
Head Diameter: 0.96 inch (24.5 mm)
WEIGHT: 1.3 oz (38 gram) without battery
MODES: User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
OUTPUT/RUNTIME:
Low: L1 3.8 Lm (18 days) or L2 0.43 Lm (2.8 months)/0.06 Lm (5.1 months)/0.01 Lm (7.1 months)
Medium: M1 70 Lm (33 hrs) or M2 32 Lm (73 hrs)/12 Lm (8 days)
High: H1 1300 Lm (PID, approx 2.2 hr) or H2 670 Lm (PID, 2.8 hr)/360 Lm (4.3 hr)/160 Lm (12 hr)
Strobe: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
BATTERY: One 18650 size (i.e. unprotected, 65.0-65.2 mm long) 3.6-4.35V li-ion rechargeable. (BATTERY INCLUDED!!!)
WATER/IMPACT RESISTANCE: IPX-7 (2 Meters/30 Minutes)
FEATURES:
- PID thermal regulated outputs (two highest output levels) using 384 internal brightness levels and a calibrated 0.1C resolution temperature sensor.
- Builtin battery discharging protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
- Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
- Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
- Durable electronic soft-touch switch.
- Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
- Precision machined unibody casing from premium grade aluminum bar stocks
- Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
- Durable natural hard anodized finish (Type III Class I)
- Sealed and potted LED driver circuitry
- Tempered optical grade glass
- Orange peel textured reflector
- Battery reverse polarity protection
- Pre-installed pocket clip
